Tamiya 58284 - 1/10 TB Evolution II / Limited Edition 田宮遙控模型平路車套件 雙星孖星  [58284]

Tamiya 58284 - 1/10 TB Evolution II / Limited Edition
價格:
HKD$2,642.35
牌子:
Tamiya
型號:
58284
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - On-Road - Touring Cars - Electric Powered
類別中嘗試尋找類似的產品
填寫評論
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
alt="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition" title="Tamiya 58284 - 1/10 TB Evolution II / Limited Edition"
The TB Evolution evolves yet again!The pure racing form of the TB Evolution chassis, with its longitudinally installed motor and shaft 4WD has reached the next stage of chassis evolution. This next level of evolution means an even faster top speed, a transformation in suspension geometry for improved control, and a more balanced left/right roll. Forward and rear gear cases have been securely fastened with aluminum bulkheads. Chassis employs aluminum suspension mount enabling adjustment of skid angle on suspension arms.

TB Evolution II includes not only a full array of newly designed standard parts, but an arsenal of cutting-edge race option parts as well!

  • 2.5mm-thick carbon lower frame
  • 2.0mm-thick carbon upper frame
  • 2.5mm-thick forward/rear carbon damper stay
  • 2.5mm-thick carbon body mount stay
  • 2.0mm-thick carbon battery plate
  • TRF dampers
  • Aluminum suspension mount
  • Aluminum motor mount
  • Aluminum propellar shaft
  • Full bearing set
  • Aluminum motor heat sink
  • Aluminum servo stay (short)
  • Light-weight aluminum wheel hub
  • Front/rear universal shaft
  • Special ball diff.
  • Front one-way
  • Front/rear stabilizer
  • Specialized urethane bumper
  • Fiber mold tire, medium-narrow type A
Specifications
  • Overall length: 378mm
  • Overall width: 187mm
  • Minimum clearance: 5mm
  • Weight fully equipped: 1,490g (including TP-S3003 servo, CPR Unit, motor, RC3000MH battery)
  • Wheel base: 257mm
  • Tread (front and rear): 163mm
  • Chassis material: carbon
  • Chassis type: double deck frame
  • Steering tie rods: divided in three segments
  • Suspension (front and rear): double wishbone
  • Caster angle (f/r): 8deg/0deg
  • Camber angle (f/r): variable
  • Toe angle (f/r): 0deg (variable)/3deg
  • Skid angle: 1.6deg/0deg
  • Dampers (f/r): TRF dampers
  • Drive train: shaft driven, full-time 4WD
  • Gear ratio: 6.73:1(kit standard)
  • Diff gear system (f/r): ball diff.
  • Speed controller: electronic speed controller
  • Tire width (f/r): 24mm
  • Tire diameter (f/r): 64mm
  • Tread pattern (f/r): racing slick

*Limited Editionn
Motor, body, R/C equippment, and battery sold separately

ELECTRIC KITS REQUIRE::(unless stated differently above)
  • Radio: 2-Channel with servo(s)
  • Battery: 6-cell flat with standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Paint: PS for Polycarbonate/TS for ABS
  • Misc. Items: Building and track equipment

Copyright © 2013-2025 rcjaz.com.hk 版權所有