Tamiya 42311 - 1/10 TRF419X WS Chassis Kit 田宮遙控模型平路車套件 雙星孖星  [42311]

Tamiya 42311 - 1/10 TRF419X WS Chassis Kit
價格:
HKD$4,152.95
牌子:
Tamiya
型號:
42311
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - On-Road - Touring Cars - Electric Powered
類別中嘗試尋找類似的產品
填寫評論
alt="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit" title="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit"
alt="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit" title="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit"
alt="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit" title="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit"
alt="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit" title="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit"
alt="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit" title="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit"
alt="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit" title="Tamiya 42311 - 1/10 TRF419X WS Chassis Kit"
The TRF (Tamiya Racing Factory) 419X is the pinnacle touring car race machine from Tamiya's top tier designers. It is a vehicle that can be raced at your local track or at official Tamiya TCS races. This variant of the TRF419X (original Item: 42301) gives the hi-spec racing chassis kit a boost, with new thickness upper (carbon fiber) and lower (aluminum) deck parts included in the kit to further enhance its performance on carpet and other high-grip surfaces. The rest of the kits' features remain the same as the regular 419X.

Key Design Features:
  • Front and rear shock towers sit lower than previous model TRF machines. This feature reduces the center of gravity and allows Tamiya fans to use Tamiya low nose sports car body sets.
  • Separate front and rear bulkheads have detachable inner camber link mounts for precise adjustment of the camber linkage length. You are no longer limited to predetermined holes from the previous mounting system.
  • Sway Bar mount are fitted with a stabilizer stopper.
  • Aluminum battery mounts are slotted to easily use strapping tape to secure the battery in place.
  • Carbon fiber shock towers are secured to the aluminum bulkhead using only two screws as opposed to four as seen in previous models. This allows for more flex of the chassis.
  • Servo mount is made of two pieces: carbon fiber and aluminum.

    • Specifications
    • Scale : 1/10
    • Construction type : Assembly kit
    • Terrain use : On-Road
    • Drive-train : 4WD
    • Drive type : Belt
    • Drive line : Universal
    • Differential type : Rear oil-filled gear diff/front spool
    • Suspension : Fully independent double wishbone
    • Steering mechanism : Bell-crank
    • Shock damper : Oil-filled damper
    • Shock damper material : Aluminum
    • Tire type : Not included
    • Tire tread : N/A
    • Body material : N/A
    • Chassis material : Aluminum
    • Electronic Speed Control (ESC) : Not included
    • ESC model : N/A
    • LED Light buckets : No
    • LED lights : No
    • Motor : Not included
    • Bearings : Shielded ball bearing
    • Adjustable camber : Yes
    • Adjustable toe angles : Front and rear
    • Adjustable ground clearance : Yes
    • Adjustable gear ratio : Yes
    • Adjustable wheelbase : Yes
    • Adjustable track width : Yes
    • Adjustable shock angle : Yes

    Features
    • Includes both a new 2mm thickness aluminum chassis, and the original 2.15mm thickness carbon fiber lower deck, letting the driver switch according to the surface conditions they are running on.
    • Both the new 1.75mm thick carbon fiber and the original 2mm thick carbon fiber upper decks are included.
    • Super short TRF dampers are combined with TRF419X suspension arms.
    • Front and rear lower bulkhead parts have 3 attachment points, allowing alteration of chassis rigidity and flex. Bulkhead parts can be fitted with upper arm spacers for a greater range of setup options.
    • 2 types of ballast weight are included.

    Requires
    • 2-channel radio gear
    • 7.2 battery & charger
    • Wheels, tires, body set, motor, esc

    Copyright © 2013-2025 rcjaz.com.hk 版權所有