Serpent 190mm 1/10 scale ready-to-Race Touringcar, based on the successful 411 race-cars. Factory assembled, with race-wheel-tyres, pre-cut and prepainted body, Dragon-RC electronic speedo, Dragon-RC brushless 9T motor, Dragon-RC DTS-1 2.4ghZ transmitter. The full package to start racing in the electric touringcar category or just race anywhere for fun.
Specifications:
- Class: 1/10th scale 190mm Electric
- Purpose: 190mm touring car
- Chassis: 2.5mm glass fibre, CNC machined
- Suspension: Front C-Hub suspension system
- Rear axle: Rear gear- differential
- Front axle: Front nylon spool
- Drive system: 4wd through 2 kevlar reinforced timing belts
- Shock absorbers: RCM shock absorbers
- Wheel base: 254mm +/- 4mm
- Track-width front: 190mm /- 6mm
- Track-width rear: 190mm /- 6mm
- Adjustability: Camber, Caster, Up-Down-stops, Toe-in, width & Roll centres
- Instructions: Full colour instruction manual, reference guide
- Included: Motor, speed Controller, tires, body, radio equipment.
- Not included: Battery Lipo and 4 x AA battery for radio, charger
Features:
Chassis
Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.
Topdeck
Durable black glass-fibre topdeck with optimised flex design.
Battery-mount brackets and Lipo-holders
Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.
Servo-mount
The servo is mounteded on a separate plate, so flex is less influenced.
Shocktower front
Black glass fibre shocktower with 3 upper shock mounting holes to choose from . Holes for an extra central bodypost are already made as well.
Front bracket
Machined aluminium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.
Front suspension
Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
C-hub / steeringblock
The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheelguidance without chatter.
Shocktower rear
Black glass fibre shocktower with 4 upper shock mounting holes to choose from . The rear bodyposts are mounted to the top of the rear shocktower.
Rear bracket
Machined aluminium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR
Rear suspension
Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
Rear upright
Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.
Motormount
Machined aluminium motormount / middle shaft support.
Middle shaft
Ballraced middle shaft with 2 small pully?s and the main Serpent spur gear.
Bumper
Large foam front bumper captured by a upper and lower nylon bumper
Bodymount
Front bodymount is mounted through the front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose from.
Gear-diff
Very compact ballraced geardifferential in the rear, with steel gears and axles for durablity. Supersmooth.
Spool
Front nylon lightweight spool with screw mounted front gearpulley
Transmission / belts / pulleys
Smooth low friction fine pitch belts combined with optimised nylon pulleys
Driveshaft / wheelhex / wheelaxle
Steel driveshafts, combined with ballraced wheelaxles and nylon wheel-hex adaptors
Steering system
Steering system with optimised ackermann for neutral steering-feeling.
Shockabsorbers
Latest type RCM competition shockabsorbers with membranes and checked colorcoded race springs.
Ball-bearings
Fully ballraced with oiled high speed sealed stainless steel bearings.
Tyres-wheels
The 411-RTR is fitted with Dragon-RC rubber racing tyres with foam inlays on Serpent TC wheels for super-grip.
Body
The EFRA approved 1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in a superb paintjob with 4 colors.
Electronics
The 411 RTR comes with Dragon-RC electronic 35A speedcontroller, Dragon-RC non sensored brushless motor 9T 3000 kv, Dragon-RC DTS-1 digital 2.4 gHz pistol-typetransmitter with large LCD screen, Dragon-RC digital receiver in 2.4 gHz and Dragon-Rc digital servo 0.13s - 6kg.
Optionals / upgrading
The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optionals, also fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optionals section of the 411 Sport as well.
