Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A 京商越野車  [KY-33020]

Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A
價格:
HKD$0.00
牌子:
Kyosho
型號:
KY-33020
請輸入姓名和電子郵件地址。當貨品重新上架我們將笫一時間通知閣下.
你或可於 R/C Models - Off-Road - Buggy - Nitro Powered
類別中嘗試尋找類似的產品
填寫評論
alt="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A" title="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A"
alt="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A" title="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A"
alt="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A" title="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A"
alt="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A" title="Kyosho 33020 - 1/8 GP 4WD KIT INFERNO MP10 SPEC A"

The pinnacle of 1:8 scale off-road buggy racing is the IFMAR (International Federation of Model Auto Racing) World Championship, won by the Kyosho INFERNO a record 8 times. The INFERNO has always been the machine against which all others are measured, and it continued as the benchmark in design and performance with the release of the MP9 in October 2008. The INFERNO has now evolved with the new MP10 to maintain its dominance at the forefront of competitive R/C racing. The culmination of 10 years of relentless R&D by designer Yuichi Kanai has resulted in a trove of data for the development of the MP10 into the strongest and most advanced 1:8 machine the RC market has ever seen. Yuichi Kanai’s MP10 embodies a virtually new design for maximum performance with the high grip tires and surfaces that are so prevalent in R/C racing, to deliver next-level performance well in excess of the MP9. The many newly-designed components provide additional strength and rigidity for increased durability and reliability: main chassis; radio plate; one-piece rear wing mount; suspension arms; suspension shafts; front and rear shock towers and more. To reach to the top of the podium, the new MP10 provides you every advantage.


Key components such as the Big Bore Shocks and gear diff have been assembled by expert Inferno staff and each machine is personally checked by the Inferno’s designer, Yuichi Kanai. Just install the RC system and engine and you will be ready for action with one of the most advanced off-road racing machines ever built.


  • Installation of R/C system such as receiver and servos and connection of linkages
  • Painting of body and attachment of decals
    (Body is pre-cut but requires opening of sections to suit your choice of engine head and exhaust).
  • Tires and inners are required to be purchased separately and glued to wheels.
  • Installation of engine, clutch, manifold and muffler. Assembly and installation of piping, linkages and air cleaner.
  • Wing assembly and installation.

  • TECHNICAL DATA

  • Length 490mm
  • Width 307mm
  • Height 180mm
  • Ground clearance 28mm
  • Wheelbase 328mm(4 settings with rear hub collar position changes)
  • Tread (F/R) 254mm(3 rear settings with with bush changes)
  • Tires (F/R) sold separately
  • Gear Ratio 11.7: 1
  • Weight 3,360g (approx.)
  • Engine 21 Class (sold separately)

  • KIT CONTENTS

  • MP10 pre-assembled chassis kit
  • Special wheels
  • Pre-cut clear body
  • Wing
  • Fuel tube
  • Linkage parts
  • Clutch parts
  • Logo decals
  • Manual

  • REQUIRED FOR OPERATION

  • 2ch, 2 servo R/C system for cars
  • 21 class engine
  • Muffler & manifold
  • Tires & inners for 1/8 buggy
  • Fuel
  • Fuel bottle
  • Plug heater
  • Starter box
  • Batteries for R/C system
  • Oil for air cleaner (No.96176 HG air cleaner oil is recommended)
  • Paint for body
  • Copyright © 2013-2025 rcjaz.com.hk 版權所有