Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X [GPM023X]

價格:

HKD$279.87

牌子:

GPM

型號:

GPM023X

GTIN:

4894538293050

物品狀況:

全新

可供選擇的顏色:

數量:

填寫評論

alt="Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X" title="Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X"

產品說明

This product includes :

31mm Hex Adapter for TRX4-2pcs
21mm Hex Adapter for other models-2pcs
Stainless Steel Pin 2x10-2pcs
5mm Spring Steel Shims-2pcs
5mm Metal Washer w.opening-2pcs
19mm Stainless Steel Hex Socket Screws-2pcs
Metal Washer for GMADE models-2pcs
M4x2.5x11 Pin-2pcs
12x18x4 Bearings -2pcs

Product major function & usage:
To increase the weight of each wheel to stabilize the wheel, enlarge the angle of crawling, especially when the car is digging into some low lying area landspaces, grab the ground firmly and smoothly drive back to level.

This part is designed with a bearing in the middle with a delrin collar, the weight pendulum is made narrower on the top and wider at the bottom to allow you to crawl in different angles. The additional weight is kept downward so the crawler is more grabby to the ground and able to crawl in a larger angle.

1. Suitable for Traxxas TRX-4. Axial SCX-10 I & II. HPI Venture 116564
2. Suitable for GMADE Sawback / Sawback 4LS / Komodo (The 2pcs of metal washers are for GMADE cars - put underneth the rear shaft hex pins)
3. This part is being installed onto the outer case of the front & rear knuckle arms, specially designed by us that does not exist in the original chassis.
4. The weight of the single pendulum is 128 gram (excluding bearings and collars).
5. Two sets of hex wideners are provided. 31mm hex wideners for Traxxas TRX-4 which is 26mm wider than original. 21mm hex wideners for Axial SCX-10 I / SCX-10 II; GMADE Sawback / Sawback 4LS / Komodo. HPI Venture 116564 which is 15mm wider than original.

6. This product needs to be used on wheels with inner diameter 45mm, wheel shaft hole 5mm.
7. To use with TRX 4, insert the white delrin collars on the back side of the pendulum wheel with groove and use the screw pin to stabilize the hex.
8. To use with Axial SCX-10 I & II, GMADE Sawback / Sawback 4LS / Komodo, HPI Venture 116564, insert the bearings on both sides, install hex directly onto the steel pin.

此產品適用於 AXIAL SCX 10 Honcho, HPI Venture Toyota FJ Cruiser, GMADE Komodo, GMADE SAWBACK 和 AXIAL SCX10 II

熱門品牌

Brass Pendulum Wheel Knuckle AXLE Weight + 21mm Hex Adapter - 20pc set - GPM GPM023X [GPM023X]